Right click your mouse on where it says “Bullet M2” and then select the
Details
option. You should now see
the window in Fig 2.
Figure 2
Select the lower IP address that starts 169.254.xxx.xxx and click on the “
Web UI”
button. This should take
you to the normal log in screen of the WL510 and once logged in you can click on the “Reset to Defaults”
button on the Status Tab.
You should now have everything back to normal. However, if you have one of the WL510 units produced
towards the end of 2012, that has the Ubiquiti rather than Digital Yacht home page, please contact
for a configuration file to complete the process.
In extreme cases it may be necessary to open the WL510 system unit and press the internal reset button.
The following procedure should be followed in these cases.
Hardware Reset;
Carefully unscrew the four black screws and remove the plain end cap of the WL510...
