DIGITAL YACHT Smart WLN10, Руководство по продукту, Страница: 4 / 8

Installation Step 3 – Powering the WLN10
•
Connect the 12/24v DC supply to RED(+) and BLACK(-) wires of the
PWR/DATA cable.
•
An in-line 1A fuse (not supplied) or suitable circuit breaker, should
be wired in the positive power connection to protect the cabling.
•
Apply power and the three LEDs should start to illuminate or flash.
The following table shows what each LED indicates;
Condition Red LED Yellow LED Green LED
ON (Solid)
TCP
Connection
Fast Blink
No wireless
connection
Data
Slow Blink Data
UDP
Connection
OFF
Wireless device
connected
No Data No Power
•
Turn off the WLN10 and continue with the NMEA, USB and
Wireless installation.
Installation Step 4 – Interfacing (NMEA)
•
The Smart Server allows full bi-directional, wireless NMEA0183
data communication, but in some installations, you only need
communication in one direction i.e. NMEA0183 data from an
instrument system to an iPhone/iPad application.
•
In this situation do not connect the ) and Brown(-) data
output wires, just trim the bare ends and ensure they cannot touch
each other or any other electrical connections.