NAVDoctor will now display a window saying that the Wi-Fi settings have been
changed and the unit will now reboot. On rebooting it will try to join the selected
wireless network and if successful the Status LED will stop flashing a few seconds
after booting up and stay permanently ON.
If you have any problems connecting to another network, press and hold the Reset
button on the bottom edge of the unit for >10 seconds and NAVDoctor will reset to
factory defaults.
Also, on the Settings page are the details of the Gateway and Wireless firmware
versions and the free memory value. Updates to the wireless firmware can be done
via the web interface
–
for more information.
This Quick Start Manual just covers the very basic operation of NAVDoctor and a
more detailed description is give in the training video at…
https://www.youtube.com/watch?v=HfuUEdKeBX4
Figure 7