Installation Step 3 – Mounting the amplifier
The amplifier should be mounted in a dry location close to the TV. It is not waterproof. In general, permanent access is not required
as it will only be necessary to occasionally adjust the antenna gain or to twitch the amplifier on/off
Installation Step 4 – Cables & Connections
Run the RG6 coax cable assembly and connect to the ANT INPUT connector
Option 1
The amplifier is supplied with a self adhesive patch mount allowing screwless
fitting of the amplifier onto a smooth dry surface without the need for screws
Option 2
The amplifier is can be mounted using the supplied screws and thumb nuts. Fit
to a bulkhead and cover the screws using the covers supplied
Power Switch
LED power
indicator
Rotate the dial to adjust the
amplifier gain from -9 to +27dB
Note:
Drawing shows the optional dual TV out
amplifier available as an accessory. The
DTV100 is supplied as standard with a single
TV and single FM outlet. Contact Digital Yacht
to purchase the dual TV amplifier if required.
Содержание DTV100
Страница 1: ...DTV100 Marine TV Antenna...
