CLA1000 Fault Finding Guide
Version 1.0 (29/01/2014)
Digital Yacht Limited
E-Mail – [email protected]
Section 1: Initial inspection.
Inspect un
it for obvious damage
/ signs of misuse
Unit has been opened
Warranty
invalidated. SRT
will charge for
repair.
Unit has been damaged
thru misuse
Unit has
n
o
t been opened
/ no obvious signs of
damage or water ingress
Unit appears to be water
damaged
Unit is IP rated to
IP52, so if unit appears to have been
immersed in water or subject to extensive water ingress,
this will be caused by incorrect installation or misuse.
Connect unit to:
-
12
/24V Pow
er Supply with Min 5A rating
-
Suitable VHF antenna / Load *
-
GPS antenna with clear view of sky
-
PC / Laptop preloaded with
ConfigAIS software via serial connection
* Refer to Se
ction 4
of this guide
for advice and notes about
Antenna systems.
Switch on power supply
to unit
Screen Light
s Up and
Screen options appear
Screen Lights Up
but no
text appears
Screen
does not light up
at all.
Continue
on next page
Visi
and apply
Check power supply
is active and
connection is correct
Unit will require internal
inspection by SRT.
Submit an
RMA
request
at
www.
support.srt
-
marine.com
Screen does not light up
at all.
Software updated successfully but
s
creen
still
does not light up
/
Software Update unsuccessful
Software updated
successfully
Power down
unit
Discoloured pixels / Lines
missing on screen
Unit will require Repair by
Digital Yacht, email us at
Warrant Void
Digital Yacht will
charge for repair
Contact us for latest Software
