DIGITAL YACHT LTD
AquaPro 2 PC Quick Start Guide
Installation Step 3
On the rear of the AquaPro PC is a single black cable that has three wires. This is the Power cable. Connect the
Red (+) and Black (-) wires in the Power
cable to the ship’s 12v or 24v supply.
Ensure that the supply is connected via a suitable fuse or suitable circuit breaker (in the positive power
connection).
A 5A fuse/circuit breaker is recommended for most installations and 10A is the maximum value that
should be used.
You will note that there is a White wire soldered to the Red wire. This is the remote switch wire and should always
be connected to the Red wire if no remote switch is required. The AquaPro PC will not power up correctly if the
White wire is disconnected from the Red wire and no remote switch is fitted
– see wiring diagram.
Do not try to turn on the AquaPro PC yet.
Installation Step 4
The connections on the rear of the AquaPro PC are as follows;
Number
-
Item
1
-
PS2 Keyboard Connector
2
-
USB 2.0 Ports 2 + 3
3
-
LAN (RJ45) Ethernet Port
4
-
VGA Port for Monitor
5
-
Centre Sub Woofer Port (Orange)
6
-
Rear Speaker Out Port (Black)
7
-
Optical SPDIF Output
8
-
Line In Port (Light Blue)
9
-
Line Out Port (Lime)
10 -
Microphone Port (Pink)
11 -
HDMI monitor
12 -
USB 3.0 Ports 4+5
13 -
eSATA Port
14 -
USB 3.0 Ports 1+2
