DIGITAL YACHT LTD
AIS100PRO Quick Start Guide
QUICK START AIS100PRO V1.01
Fixing location drawing
•
Once the unit is secured, connect the AIS/VHF antenna. Ensure the connection is fully made; should
feel a slight click as the BNC locks.
Installation Step 3 - Power
•
Provide power connections to the unit. Power is connected to the four core PWR/DATA cable on the
Red and Black wires. The Red wire is the positive (+) connection. The Black wire is the negative (-)
connection.
•
Connect the stripped wires to the nearest source of primary 12V or 24V DC power.
Ensure that the
supply is connected via the supplied 1A fuse or suitable circuit breaker.
Add the fuse in the
positive power connection to the unit if necessary.
Installation Step 4
– USB Connection
•
The AIS100PRO Receiver can be connected to a PC via its USB lead.
•
If you wish to extend the USB cable from the AIS100PRO to the PC, you can use an unpowered
USB extension cable (maximum of one 3m extension) or a more expensive powered USB extension
cable (maximum of one 5m extension) which are available from good electronics shops.
