DIGITAL YACHT LTD
AIS100 Quick Start Guide
QUICK START AIS100 VR1
Fixing location drawing
Once the unit is secured, connect the AIS/VHF antenna. Ensure the connection is fully made; should
feel a slight click as the BNC locks.
Installation Step 3
Provide power connections to the unit. Power is connected to the four core PWR/DATA cable on the
Red and Black wires. The Red wire is the positive (+) connection. The Black wire is the negative (-)
connection.
Connect the stripped wires to the nearest source of primary 12V or 24V DC power.
Ensure that the
supply is connected via the supplied 1A fuse or suitable circuit breaker.
Add the fuse in the
positive power connection to the unit if necessary.
Installation Step 4
The AIS100 Receiver can be connected to other AIS compatible equipment via the NMEA0183
connections on the PWR/DATA cable.
A table showing what each of the 4 wires of the PWR/DATA cable does is printed on the AIS100
Receiver and repeated below for your convenience;
