Installation-
Instructions
1
Detach the camera’s cover dome from the
camera’s module by unscrewing the four cover
dome screws using the Torx Wrench.
2
Use the camera or mounting template to mark
and drill the necessary holes in the wall or ceiling.
3
Pull wires through and make connections.
4
5
Using four included screws, mount and
secure the camera to the wall or ceiling.
Secure the camera’s cover dome onto the
camera base and remove the protecting film to
complete the installation.
Note : Before you assemble the dome cover, you have to
adjust the direction of shield cover by turning the
dome.
11