Quick Start Guide
Quick Start Guide
1. The mounting surface must withstand five times the weight of
your camera.
2. Do not let the cables get caught in improper places or the electric
line cover can be damaged. This may cause a short or fire.
3. Detach the camera’s dome cover by pressing on the two small
buttons located at each side of the cover dome.
4. Remove the dome protective film before placing the dome back
on the camera base.
STEP 1 – PREPARING TO MOUNT THE CAMERA
Pass the wires through the mount bracket and make all
necessary connections. Connect the BNC cable and power
cables to the camera.
STEP 2 – CABLING THE CAMERA TO
EXTERNAL DEVICES
Power
Requirements
Power Consumption
DC12V/AC24V
dual voltage
DC12V (LED off): 5.76W, 480mA
DC12V (LED on): 7.92W, 660mA
AC24V (LED off): 6.49W, 429mA
AC24V (LED on): 7.15W, 495mA
DWC-D4883WTIRW
WHAT’S IN THE BOX
DC plug
cable
1
Quick
setup
guide
1
Screws and
anchors –
2pcs
1 set
Test video
cable
1
Mounting
template
1
Torx Wrench
DC Plug Cable
Test Video Cable
Manual
Template Sheet
Screw &
Moisture absorber &
Absorber Guide
Sunshield cover &
Torx Wrench
DC Plug Cable
Test Video Cable
Manual
Template Sheet
Screw &
Moisture absorber &
Absorber Guide
Sunshield cover &
Protective cover
Protective film
Torx Wrench
DC Plug Cable
Test Video Cable
Manual
Template Sheet
Screw &
Moisture absorber &
Absorber Guide
Sunshield cover &
Torx Wrench
DC Plug Cable
Test Video Cable
Manual
Template Sheet
Screw &
Moisture absorber &
Absorber Guide
Sunshield cover &
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours:
9:00AM – 8:00PM EST, Monday through Friday
digital-watchdog.com
Attention: This document is intended to serve as a quick reference for the
initial setup. It is recommended that the user read the entire instruction
manual for complete and proper installation and usage.
NOTE:
Download all your support materials and tools in one place
1. Go to:
http://www.digital-watchdog.com/resources
2. Search your product by entering the part number in
the
‘Search by Product’
search bar. Results for
applicable part numbers will populate automatically
based on the part number you enter.
3. Click
‘Search’
. All supported materials, including manuals
and quick start guide (QSGs) will appear in the results.
