
Using the mounting template sheet or the camera
itself, mark and drill the necessary holes in the wall
or ceiling.
Pass wires through and make all necessary
connections.
Secure the camera module to the mounting surface
using the two (2) screws and anchors included.
Adjust the camera’s pan, tilt and position to achieve
the desired view. See page 18.
Place the dome over the camera and snapt it into
position to complete the installation.
Remove the dome’s protective film. Softly wipe the
dome/lens cover with lens tissue or a microfiber
cloth with ethanol to remove any dust or smudges
left from the installation process.
Installa�on - Instruc�ons
Template sheet
1
2
3
4
5
6
13