
1
Detach the dome cover by torx wrench provided from
bottom case before installation the camera.
2
Using the template sheet, make the cabling hole on the
wall/ceiling.
4
Once removing the rubber stopper, fix the bottom case
on the ceiling.
6
Attach the dome cover to the bottom case.
7
Detach the protection film from the dome cover.
5
To achieve desired view direction and orientation, rotate
3-axis gimbal. To fix the setting, tighten the tilt stopper
screw.
Installation
Installation -
3
2
7
6
5
4
3
2
Template Sheet
3
Connect the network cable, power cable respectively.
See the section ‘Installation - Cabling’ for details.
a
b
c
Put the Lan cable into (a), then (b) will be assembled to (a)
making any space.
tightly. As a final step, (c) need to be assembled to (b) without
Tilting Angle can be adjusted by screw.
8