Default Login Information
Username:
admin
Password:
admin
Quick Start Guide
Quick Start Guide
WHAT’S IN THE BOX
Quick set up
guide
1
Tapping screws
PA 4x35 – 4pcs
1 Set
Mounting
template
1
Plastic anchors
– 4pcs
1 Set
Waterproof
cap
1 Set
Allen wrench
1
Sponge
1
CVBS and
DC IN
cables
1
1. The mounting surface must bear three times the weight of your camera.
2. Do not let the cables get caught in improper places or the electric line
cover to be damaged. This may cause a breakdown or fire.
3. For the installation process, remove the camera’s dome cover by
loosening the screws at the base of the dome.
4. Using the mounting template sheet or the camera itself, mark and drill
the necessary holes in the wall or ceiling.
6. To use the camera’s water proof wiring:
a. Install the LAN cable into .
b. will be assembled to with a 1/4 turn.
c. Thread tightly to .
7. Secure the camera to the mounting surface with the provided screws.
8. Adjust the camera to obtain an optimum angle by using the camera’s
three axis gimbal. The camera’s max angles are:
Pan: 0°~ 360°
Tilt: 0°~ 77°
Rotation: 0°~ 360°
9. Remove the protection film softly to complete the installation.
5. Pass the wires through the mount bracket and make all necessary
connections.
a. NETWORK CONNECTIONS – If you are using a PoE Switch, connect
the camera using an Ethernet cable for both data and power.
b. NETWORK CONNECTIONS – If you are using a non-PoE switch,
connect the camera to the switch using an Ethernet cable for data
transmission and use a power adapter to power the camera.
STEP 1 – PREPARING TO MOUNT THE CAMERA
STEP 3 – INSTALLING THE CAMERA
STEP 2 – CABLING THE CAMERA TO EXTERNAL
DEVICES
a
a
b
b
c
NOTE:
To ensure moisture seal, make sure the o-ring is in place
between
and . In extreme environments use of an outdoor
rated sealer is recommended.
a
b
NOTE:
When using the waterproof cap, crimp the RJ45 connector
after passing the cable through the waterproof cap.
Power requirements
Power consumption
DC 12V
POE IEEE 802.3af
Max. 5W
NOTE:
Download all your support materials and tools in one place.
1. Go to:
http://www.digital-watchdog.com/support-download/
2. Search your product by entering the part number in the ‘Search by Product’
search bar. Results for applicable part numbers will populate automatically
based on the part number you enter.
3. Click ‘Search’. All supported materials, including manuals, Quick Start
Guides (QSG), software and firmware will appear in the results.
Tel: +1 (866) 446-3595 / (813) 888-9555
Technical Support Hours:
9:00AM – 8:00PM EST, Monday thru Friday
digital-watchdog.com
Attention:
This document is intended to serve as a quick reference for initial
set up. It is recommended that the user read the entire instruction manual for
complete and proper installation and usage.
DWC-MVT4WiA
NOTE:
If the PoE network switch is used to connect the camera,
DC12V power supply is not required.
Power
Ethernet
Cable
Ethernet
Cable
5 a
5 b
6
a
b
c
Template
Sheet
Sponge
Reset
Button
1
2
7
3
4
8
Tilt: 0° ~ 77°
Pan: 0° ~ 360°
Rotation: 0° ~ 360°