Digital Watchdog MEGApix DWC-MT95WiATW, Руководство пользователя, Страница: 17 / 61

13
Lens Distortion Correction: When the image appears distorted to some extent,
please enable this function and adjust the level according to the actual scene to
correct the distortion. (On supported models.)
Auto Iris: If your camera is auto Iris, please enable it.
Backlight Compensation (BLC):

Off: disables the backlight compensation function. It is the default mode.

HWDR: WDR can adjust the camera to provide a better image when there are
both very bright and very dark areas simultaneously in the field of the view by
lowering the brightness of the bright area and increasing the brightness of the
dark area.
The recording will be stopped for a few seconds while the mode is changing
from non-WDR to WDR mode.

HLC: lowers the brightness of the entire image by suppressing the brightness
of the image’s bright area and reducing the size of the halo area.

BLC: If enabled, the auto exposure will activate according to the scene so that
the object of the image in the darkest area will be seen clearly.
HFR: High Frame Rate. If “ON” is selected, the system will restart and then the
maximum value of the frame rate of the mainstream can be set to 60 fps /50fps.
Antiflicker:

Off: disables the anti-flicker function. This is used mostly in outdoor
installations.

50Hz: reduces flicker in 50Hz lighting conditions.

60Hz: reduces flicker in 60Hz lighting conditions.
Smart IR: Choose “ON” or “OFF”. This function can effectively avoid image
overexposure and underexposure by controlling the brightness of the IR lights
according to the actual conditions to make the image more realistic. Please
enable it as needed.
White Balance: Adjust the color temperature according to the environment
automatically.
Frequency: 50Hz and 60Hz can be optional.
Day/Night Mode: Choose “Auto”, “Day”, “Night”, or “Timing”.
Infra-red Mode: Choose “Auto”, “ON” or “OFF”.
Exposure Mode: Choose “Auto” or “Manual”. If “Manual” is chosen, the digital
shutter speed can be adjusted.
Gain Mode: Choose “Auto” or “Manual”. If “Auto” is selected, the gain value will
be automatically adjusted according to the actual situation. If “Manual” is
selected, the gain value shall be set manually. The higher the value is, the brighter
the image is.
Corridor Pattern: Corridor viewing modes can be used for situations such as
long hallways. 0, 90, 180 and 270 are available. The default value is 0. The video
resolution should be 1080P or below if this function is used.
Image Mirror: Turn the current video image horizontally.
Image Flip: Turn the current video image vertically.