Step 5 – WEB VIEWER
Once the camera’s network settings have been setup properly,
you can access the camera’s web viewer using the DW IP Finder
™
.
To open the camera’s web viewer:
1.
Find the camera using the DW IP Finder
™
.
2.
Double-click on the camera’s view in the results table.
3.
Press the ‘View Camera Website’. The camera’s web viewer
will open up in your default web browser.
4.
Enter the camera’s username and password (default are
admin / admin).
5.
If you are accessing the camera for the first time, install the
VLC files in order to view video from the camera.
4.
The camera’s default network information is:
Network Setup
1.
Run the CD included with the camera and click on the DW IP Finder
™
file.
2.
The software will scan your network for all supported cameras and display the results in the table. Allow up to 5 seconds for the IP Finder to find the camera
on the network.
3.
Select a camera from the list by double-clicking on the camera’s image or clicking on the ‘Click’ button under the IP Conf. column. The camera’s network
information will appear. If necessary, you can adjust the camera’s network type.
Select DHCP if the internet service is dynamic IP. This will allow the camera to receive its IP address from the DHCP server.
Select STATIC to manually enter the camera’s IP address, subnet mask, Gateway and DNS information.
Contact your network administrator for more information.
Default TCP/IP information
• IP: 192.168.1.80
• Subnet Mask: 255.255.255.0
• Gateway: 192.168.1.1
• DNS: 168.126.63.1
6.
To save the changes made to the camera’s settings, input the ID
and PW of the camera for authentication and click ‘Save’.
7.
If the camera needs to be rebooted after the settings were
changed, press the ‘Reboot’ button. The camera will cycle power
and will appear back in the search results once the reboot is
complete.
5.
To view the camera’s web viewer, click on ‘View Camera Website’.
‘Port Forwarding’ has to be set in your network’s router for
external access to the camera.
Default ID / PW : admin / admin
Rev Date: 8/15
© 2015 Digital Watchdog. All rights reserved.
Note: Please see the full product manual for web viewer setup,
functions and camera settings options.
Step 4 – DW IP FINDER
™
Use the DW IP Finder
™
included in the camera’s accessory CD to scan the network and detect all MEGApix
®
cameras, set the camera’s network settings,
perform firmware upgrade or access the camera’s web client.
DWC-‐MF10M28T
DWC-‐MF21M4TIR
DWC-‐MF10M28T
DWC-‐MF21M4TIR
Firmware Upgrade
Open Camera's IP
Configuration Screen
Camera Uptime
Camera Name,
Model, IP Address,
and MAC Address
Camera's Firmware
Search for
Cameras
View Camera's
Thumbnail View
Camera's Network Settings
Filter Search
Results
Quick Start Guide