14
H
OW TO ACCESS THE CAMERA’S OSD MENUS*
The camera has four separate sensors, each with its own OSD menu and settings. When
adjusting the camera’s settings, each lens/ sensor will have their own set of values and
settings and will be set separately.
To access each sensor’s OSD menus select one of the following options:
1. The camera has four (4) BNC outputs, each supporting UTC (Up the Coax)
communication. When the camera is connected to a DVR supporting UTC communication
like the VMAX A1
TM
All-in-One DVR, you can access the camera’s OSD menu directly from
the DVR.
2. The camera supports RS485 communication, allowing to control the camera remotely.
3. In the camera’s external control board, there is a switch next to the joystick controller. The
switch determines which of the four (4) sensors will be displayed in the secondary BNC
output. Once the switches are set to a specific sensor, press the joystick controller to view
the sensor’s OSD menu. The sensor’s display will appear at the top left corner of the display
for 60 sec.
Refer to the images in the next page for more information on the switch settings for each
sensor selection.
R
L
UP
D
OSD Joystick
BNC Local Output Switch