background image

1

  Using the mounting template or the junction box itself, mark and drill the 

necessary holes on the mounting surface.  

2

  Secure the junction box to the mounting surface using the screws and 

anchors included. 

3

  Affix the safety wire at the bottom of the mounting bracket’s base. Connect 

the other side of the safety wire to the base of the camera.

4

  To mount the camera to the mounting accessory, remove the dome from 

the camera base using the wrench included with the camera.

NOTE:

  Do not touch the lenses when handling the camera modules. 

5

  Pass wires through and make all necessary connections. 

6

  Secure the camera to the mounting bracket using the included screws. Align 

the indented lines on the side of the camera with the lines on the mounting 

bracket as seen in the image below. Rotate the camera clockwise to lock it 

into position.

 

UNLOCK LOCK

7

  Adjust the camera modules’ position and angle and complete the 

installation by placing the dome cover on the camera. Secure the dome 

cover to the camera base using the screws included with the camera. See 

the camera’s QSG for more information. 

Quick Start Guide

Rev Date: 08/21

Copyright © Digital Watchdog. All rights reserved.  

Specifications and pricing are subject to change without notice.

INSTALLATION

Junction box

Camera module

Camera dome cover

INSTALLATION WITH GANG BOX OR HANDY BOX (OPTIONAL)

Type A: Handy boxes

Type B: 2-gang handy box/switch box

NOTE:

  When mounting the junction box to 

a gang box using installation option 
B, use the wall anchors and screws to 
secure the junction box and gang box 
to the mounting surface. 

Отзывы: