
5
I
NSTALLATION*
1. Remove the 1 STOP SCREW(B) on UPPER CASE(C),
using the L-WRENCH(A).
2. Separate UPPER CASE(C) from BOTTOM CASE(E).
3. Make the 4 mounting screw holes on the ceiling/wall.
The holes of BOTTOM CASE(E) can help locate the
correct hole locations.
4. Put POWER CABLE(F) AND VIDEO CABLE(G) into
the ceiling/wall.
5. Fix the BOTTOM CASE(E) onto the ceiling/wall, using
the SCREWS(D)
6. Camera adjustment and setting.
(Referance - “CAMERA SETTING”)
7. Connect UPPER CASE(C) and BOTTOM CASE(E).
8. Tighten the STOP SCREW(B) on UPPER CASE(C),
using the L-WRENCH(A).