Quick Start Guide
Rev: 12/21
Copyright © Digital Watchdog. All rights reserved.
Specifications and pricing are subject to change without notice.
INSTALLATION
1
Separate the mounting plate from the junction box base by loosening the four (4) screws.
2
Using the mounting template or the junction box base itself, mark and drill the necessary holes on the
mounting surface.
3
Secure the junction box base to the mounting surface using the screws and anchors that were included with the junction box.
4
Connect the camera to the mounting plate using the included camera mounting screws.
5
Make all necessary cable connections to the camera and arrange the cables in the junction box base. Use the waterproof cap
and gasket with the network cable to reduce the risk of water leaks. See the camera’s QSG for more information.
6
Connect the mounting plate to the junction box’s base using the included screws (from INSTALLATION Step 1).
7
Adjust the camera’s lens position and angle using the camera’s tilting arm. Lock the arm into place by securing the tilting
screws at the base of the arm.
