Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
EX-LED
Quick Start Guide
PARTS & DIMENSIONS
Screw
5.06”
(128.6mm)
IR LEDs
EX-LED Cable
6.28”
(159.6mm)
DC12V / AC24V Cable
1.45”
(37mm)
INSTALLING THE MOUNTING ACCESSORY
1.09”
(27.9mm)
1. Connect the EXT-LED cable from the illuminator to the camera’s cable labeled “EX-LED”
2. Connect the power cable to an adequate power supply.
• Power requirements: DC12V/AC24V Dual Voltage
• Power consumption: DC12V : Max 11.0W, AC24V : Max 11.0W
INSTALLATION ON AN IP CAMERA
INSTALLATION ON AN ANALOG CAMERA
12VDC / 24V AC
12VDC / 24V AC
Power
Power
DC12V
DC12V
EX-LED
LED
EX-LED
LED
NOTE:
Please check your
hardware to see if it supports the IR
illuminator connection.
NOTE:
The illuminator’s cables can
be placed in any of the four holes in
the camera’s mounting bracket.
Copyright © Digital Watchdog. All rights reserved.
Rev Date: 07/17
Specifications and pricing are subject to change without notice.
