Digital Watchdog DWC-D1363D, Инструкция по установке и эксплуатации, Страница: 18 / 32

18
DAY & NIGHT
AUTO /
In AUTO mode, camera switches between day and night automatically depending on light
COLOR /
level. Camera will stay in color mode when there is enough light and will switch to B&W at
B&W
night or other low light environments. If COLOR is selected, camera always stays in day/color
mode. If B&W is selected, camera always stays in night/B&W mode.
If AUTO is selected, please define the following settings:
*BURST: If ON is selected, the camera provides a color burst signal in night mode.
*COLOR->B&W: Adjusts the light level at which the camera switches from day (color) to night (B&W) mode. The higher the
* number, the lower the light level.
*B&W->COLOR: Adjusts the light level at which the camera switches from night (B&W) to day (color) mode. This number
* should be lower than the value of COLOR->B&W above.
*READ TIME: 3s~12s. Time interval delay before switching from day mode to night mode.
*EX_IR INT.: AUTO/EXT. If using IR LEDs built into the camera, select AUTO. If using external IR LEDs separately,
* select EXT.
NIGHT C.
0 ~ 100
Color will be reduced in low light conditions. (This level cannot be adjusted when
3D-DNR is ON.)
NIGHT A.
0 ~ 100
Edge sharpness will be reduced in low light conditions. (This level cannot be adjusted
when 3D-DNR is ON.)
EXIT JUMP
SAVE & EXIT
Save the current settings and exit the OSD menu.
EXIT
Exit the OSD menu without saving the changes.
D&N MODE