manualshive.com logo in svg

Digital Watchdog DW-VAC162T, Руководство пользователя, Страница: 47 / 64

Поделиться
Скачать
Digital Watchdog DW-VAC162T Скачать руководство пользователя страница 47

43 

 

 

 

Note 

According to the setup of Resolution and FPS, the system automatically calculates “Remaining 

FPS” for dual stream.

 

Note 

Dual stream function is applied to network transmission of the live image monitoring, only. VOD 
(Playback) is not related to dual. 

 

4.4.2. SCHEDULE 

Set the recording schedule for each camera individually or set for “ALL.” Recording can be set by each hour 
from 00 through 23 a day. You can also set up a special recording schedule for holidays.   

 

NO COLOR (Off) 

No color indicated that  there is no recording  in progress. When a camera is set to “off”  in the recording 
schedule, the system will not record anything even though the user set recording frames and set the 
camera to on in “CAMERA.” 
 

YELLOW (Continuous Recording) 

The system records at all times as set in the “CAMERA” settings. 
 

GREEN (Motion-Detection Recording) 

The system records only when motion is detected and stops recording when motion is not detected. 
If “EVENT > MOTION ALARM” is disabled, then the system will record when motion is detected, but motion 
alarm will not be activated. 
 

ORANGE (Sensor-Activated Recording) 

The system records only when the sensor is triggered as set in “EVENT > SENSOR” menu. 
If “EVENT > SENSOR” and set this mode, then not record anything even though a sensor is triggered. 
 

SKY BLUE (Cont Motion Detection Recording) 

The system records continuously as set by “RECORD > CAMERA” menu. 
When motion is detected according to the settings in “EVENT  >  MOTION ALARM”,  the DVR will switch 
recording mode to motion configuration and display a “motion event” message to Remote Software over 
the network. 
If  “EVENT  >  MOTION ALARM”    is disabled, then the system will record when motion detected but the 
motion alarm will not be activated. 
 

BROWN (Cont Sensor-Activated Recording) 

The system records continuously as set by the “RECORD > CAMERA” menu. 
When motion is detected according to the setting in “EVENT > SENSOR”, the DVR will switch recording 
mode to motion configuration. If “EVENT > SENSOR” is disabled, then the system will begin recording and 

Содержание DW-VAC162T

































































Отзывы:

Нет отзывов