PRECAUTIONS
Before installing and using the camera, please read this manual
carefully.
Be sure to keep it handy for later reference.
UNPACKING
Care should be taken when the unpacking the shipped unit.
Check the parts list and confirm all items are included in.
Contact … .. If a problem is noted.
■
Do not open or modify
Do not open the case except during maintenance and installation,
as it may be dangerous and may damage the product.
■
Do not put objects inside the unit
Make sure that no metal objects or flammable substances
enter the camera as it can cause fire, short-circuits, or permanent
damage.
■
Be careful when handling the unit
To prevent damage, do not drop the camera or subject it to
strong shock or vibration
■
Install away from electric or magnetic fields.
■
Protect from humidity and dust
■
Protect from high temperature
Be careful when installing on the ceiling in a kitchen or boiler
room, as the temperature may damage the camera.
■
Cleaning
Before installing and using the camera, please read this manual
carefully.
Be sure to keep it handy for later reference.
UNPACKING
Care should be taken when the unpacking the shipped unit.
Check the parts list and confirm all items are included in.
Contact … .. If a problem is noted.
■
Do not open or modify
Do not open the case except during maintenance and installation,
as it may be dangerous and may damage the product.
■
Do not put objects inside the unit
Make sure that no metal objects or flammable substances
enter the camera as it can cause fire, short-circuits, or permanent
damage.
■
Be careful when handling the unit
To prevent damage, do not drop the camera or subject it to
strong shock or vibration
■
Install away from electric or magnetic fields.
■
Protect from humidity and dust
■
Protect from high temperature
Be careful when installing on the ceiling in a kitchen or boiler
room, as the temperature may damage the camera.
■
Cleaning
Dirt can be removed from the case only by wiping it with a soft cloth
moistened with a soft detergent solution.
■
Mounting Surface
The mounting surface must be strong enough to support
the camera.