Digital Voice Systems Net-2000 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 68

Digital Voice Systems Net-2000 Скачать руководство пользователя страница 23

Net-2000™ Voice Codec Unit
User’s Manual

Page 13

Section 3 – Net-2000™ VCU Control

DVSI Confidential Proprietary

DTMF

Open DTMF selection pop up window and the home page to view current setting and system
condition.

Network Settings

The network settings and the output and input gains setting selections.

Version

Displays the current software firmware version

System Status

Located just under the navigation menu is the status indication. The status screen displays the
current running condition of the NET-2000™ VCU.

Status: Net-2000™ is IDLE

Figure 8 Status Indication

Net-2000™ is Idle

The Net-2000™ VCU is idle when the unit is stopped. In this condition the unit is will be ready to
process data through the encoder or decoder when the START button is selected.

VOIP Mode

When the start button is selected the unit is put into VOIP mode indicating that the Net-2000™ VCU
is in Target IP address communications mode and sending data over the Ethernet interface. VOIP
mode is also displayed when Loopback communications mode is selected because the Net-2000™
VCU sends data over the internal loopback Ethernet address of 127.0.0.1

File I/O Mode

In File mode the Net-2000™ VCU is available for communication with PC on the LAN to sending data
over the Ethernet interface. To set the Net-2000™ VCU to be in file I/O mode select File Mode from
the list on the left side of the Net-2000™ VCU home page. Once selected select the start button and
the Net-2000™ VCU status will be displayed as shown in Figure 8 Status Indication. The Ethernet
address of the target is set to 0.0.0.0 to indicate that it should be ignored and the voice source is
displayed as “Ethernet”.

Start / Stop Button

Upon power up the Net-2000™ VCU loads the default settings and the unit is idle. Click the Start
button to begin running the VCU with the default settings. Click the Stop button to put the Net-2000™
VCU back into the idle mode. Changes to the settings can be made while the unit is active.
However, the new settings will not take affect until the Start button is clicked.

Note: The “Start” button will automatically stop and restart the Net-2000™ VCU. It is not necessary
to click on the “Stop” button and then click the Start button to restart the Net-2000™ VCU with a new
setting.

or

Figure 9 Start / Stop Button

«
...
21
22
23
24
25
...
»

Содержание Net-2000





































































Отзывы:

Нет отзывов