Digital View 41743000X-3, Инструкция по эксплуатации

Страница: 22 / 31

Page 22 of 32
Appendix II
– RS-232 control protocols
RS-232 Serial control (Baud rate 2400, 8 bits, 1 stop bit and no parity)
Physical connection :
Controller side
Computer side
Connector interface : CN8 Connector interface : Serial port
Mating connector : Molex 51021-0600 Mating connector : DB9 Female
PIN# Description PIN# Description
4 RS-232 Tx Data 2 RS-232 Rx Data
5 Ground 3 RS-232 Tx Data
6 RS-232 Rx Data 5 Ground
Software connection :
The OSD function can be controlled through sending the RS-232 protocol.
The RS-232 program can be custom-made to fit for application or it can be used the program provided by Digitalview on request. Please contact
your local sales for informations.
1.
Commands to implement switch mount control buttons
Function Command Description Acknowledge (if enabled)
Menu 0xf7 Menu button pressed Button equivalent
Select-down
button 0xfa Select down button
pressed Button equivalent
Select-up
button 0xfb Select up button pressed Button equivalent
Right/+ button 0xfc Right/+button pressed Button equivalent
Left/- button 0xfd Left/- button pressed Button equivalent
2. Parameter setting - immediate, relative, reset and query
Function Command Description Acknowledge (if enabled)
Brightness
control 0x81,
nn | “+” | “-” |
“r” | “R” |
“?” Set brightness =
value/increment/decrement
Reset
Query Brightness.
Range: “0””0”-“6””4”
Default: “3””2”
Contrast
control
0x82, “a” | “A”,
nn | “+” | “-” |
“r” | “R” |
“?”
Set all contrast =
value/increment/decrement
Reset
Query Contrast.
Range: “4””0”-“6””4”
Default: “3””2”
Sharpness 0x8a,
nn | “+” | “-” |”r” |
”R” |
“?” Set sharpness=
value/increment/decrement
Reset
Query Sharpness
Range: “F””C”-“0””4”
Default: “0””0”
OSD H position 0x90,
nnn | “+” | “-“ |
“r” | “R” | “?”
Set osd_hpos =
value/increment/decrement
Reset
Query OSD horizontal position
Range: “0””0””0”-“3””E””8”
Default: “1””F””4”
OSD V position 0x91,
nnn | “+” | “-“ |
“r” | “R” | “?”
Set osd_vpos =
value/increment/decrement
Reset
Query OSD vertical position
Range: “0””0””0”-“3””E””8”
Default: “1””F””4”
Select menu 0x93, Select menu timeout = OSD menu timeout value.
5 4 6 3 1
5 4
6
3 1
7 8 9
Mating face of RS-232 DB9 Male
Mating face of CN8