Page 16 of 32
CONTROLLER DIMENSIONS
The maximum thickness of the controller is 13.95mm (measured from bottom of PCB to top of components, including any underside
components & leads). We recommend clearances of:
5mm from bottom of PCB - if mounting on a metal plate we also recommend a layer of suitable insulation material is added to the
mounting plate surface.
10mm above the components
3~5mm around the edges
Any of the holes shown above can be used for mounting the PCB, they are 3.2mm in diameter.
CAUTION: Ensure adequate insulation is provided for all areas of the PCB with special attention to high voltage parts such as the
inverter.
