DISCOVERY Plus user manual
© 2013 Digital Technology Art s.r.l.
CONNECTING THE DISCOVERY PLUS CCD CAMERA
To install your hardware platform on the PC, follow the steps below:
Connect the power supply cable to the DISCOVERY Plus CCD camera. The power supply is not
included in the delivery of the camera, but can be provided on request
Turn on the camera and connect the USB cable (supplied with a standard length of 1.8 m) to
the corresponding port of the PC
Pay attention:
1)
The power supply must be connected to an electrical system with neutral-to-ground
connection;
2)
The lateral sides of the camera and of the power supply must to be free to enable the
correct functioning of the ventilation system;
3)
Place the system so that you can easily manage the switch of the power supply switch
which is positioned on the front panel.
Now, install the drivers for the USB connection.
Power supply connector
USB connector
User Port
