22
•
Navigate to ‘Enable standby - yes’ or ‘Enable standby - no’ and press ‘Enter’ on the remote control
•
If standby is disabled, the Digital Picture Frame will not turn off at preset standby time.
To Enable daylight saving time (Yes or No):
•
Press ‘Menu’ on the remote control to go to the Main Menu
•
Navigate to ‘Settings’ and press ‘Enter’ on the remote control
•
Navigate to ‘Daylight time - yes’ or ‘Daylight time - no’ and press ‘Enter’ on the remote control
•
If enabled, the Digital Picture Frame will synchronize clock based on Daylight saving time.
To Enable play rec’d pics only (Yes or No):
•
Press ‘Menu’ on the remote control to go to the Main Menu
•
Navigate to ‘Settings’ and press ‘Enter’ on the remote control
•
Navigate to ‘Play rec’d pics only - yes’ or ‘Play rec’d pics only - no’ and press ‘Enter’ on the remote control
•
If enabled, the Digital Picture Frame will play received pictures only (received via email attachments, received from other shared frames, received from
www.MemoryFrame.com
).
•
If disabled, the Digital Picture Frame will play the received pictures first and then resume the current slideshow.
To Enable prompt me for new pics:
•
Press ‘Menu’ on the remote control to go to the Main Menu
•
Navigate to ‘Settings’ and press ‘Enter’ on the remote control
•
Navigate to ‘Prompt me for new pics - yes’ or ‘Prompt me for new pics - no’ and press ‘Enter’ on the remote control
•
If enabled, the Digital Picture Frame will play display confirmation when received pictures via email attachments, from other shared frames, or from
www.MemoryFrame.com
).
•
If disabled, the Digital Picture Frame will automatically receive and play the pictures.
To Enable show online status:
•
Press ‘Menu’ on the remote control to go to the Main Menu
•
Navigate to ‘Settings’ and press ‘Enter’ on the remote control
•
Navigate to ‘Show OnLine status - yes’ or ‘Show OnLine status - no’ and press ‘Enter’ on the remote control
•
If enabled, the Digital Picture Frame will display online status icon while playing slideshow. Frame MUST be online to receive pictures via email attachments, from
other shared frames, or from www.MemoryFrame.com.
To Set Bluetooth option:
•
Press ‘Menu’ on the remote control to go to the Main Menu
•
Navigate to ‘Settings’ and press ‘Enter’ on the remote control
•
Navigate to ‘Bluetooth’ and press ‘Enter’ on the remote control
•
Navigate to ‘Accept all pictures’, ‘Reject all pictures’, or ‘Prompt me’ and press ‘Enter’ on the remote control.
When ‘Accept all pictures’ option is selected, frame will accept all pictures beamed from Bluetooth phones or PDAs’, when ‘Reject all pictures’ option is selected, frame will NOT
accept any picture, when ‘Prompt me’ option is selected, frame will prompt user for any picture beamed from Bluetooth devices.
Resume Previous Slideshow
:
While the menu is displayed, press ‘Play’ button on the remote control will resume the previous slideshow.
Auto Resume
If the menu stays idle for more than 15 minutes, previous slideshow will resume.
To Restore Default Settings:
•
Press ‘Menu’ on the remote control to go to the Main Menu
•
Navigate to ‘Settings’ and press ‘Enter’ on the remote control
•
Navigate to ‘Restore default settings’ and press ‘Enter’ on the remote control
Supported Media Type:
•
For pictures: Supports GIF, JPG, BMP, PNG.
•
For audio: Supports WAV, MP3, WMA
•
For video: Supports WMV encoded at 320X240 – Digital Picture Frame will play video at 640X480
•
For DivX, MPEG1-2, or WMV video that is larger than 320X240, install the ‘WMVConverter’ and
encode
it before dropping it to the Digital Picture Frame.
WMV Converter:
•
You will need a computer to install WMVConverter.
•
Insert the included CD into a CDRom drive of your computer,
•
Go to the folder ‘WMVConverter’
•
Double click Setup.exe to install ‘WMVConverter’ to your computer.
•
Follow the instructions to complete the installation
•
After the installation is complete, go to ‘Start’ menu in your computer, ‘WMVConverter – Digital Spectrum Inc’, and launch ‘WMVConverter – Digital Spectrum Inc’.
•
Click on ‘Browse’ to browse to your video, click ‘Start’ to start the
encoding
. Once it is finished, the video will be stored in the same folder as the source video. The
converted video will have _DSI appended to its original filename.
•
If you encounter an error “ClassFactory cannot supply requested class” when you convert your video, go to the folder ‘WMVConverter’
•
Install WMEncoder.exe.
•
Convert your video again
