Digital Projection Mercury Quad Series, Инструкция по установке и быстрому запуску

Страница: 21 / 130

page 13
Digital Projection Mercury Quad Series
Installation and Quick-Start Guide
POSITIONING THE SCREEN AND PROJECTOR
Rev A March 2017
Removing the detachable handles
The projector is fitted with detachable handles for easier lifting and carrying.
You may need to remove the handles as they are likely to get in the way of rigging frames and other installation equipment.
1. Position the projector upside down on a flat surface.
2. Remove the screws to free the handles as shown in the illustration.
The handles can be detached and reattached multiple times.
Notes
The handles are not suitable
for supporting the weight of
the projector in permanent
installations. DO NOT attach
clamps and truss mounts to the
handles. DO NOT use the handles
in ceiling suspension scenarios.
Disconnect the projector from
the mains before attempting to
remove the handles.
Always allow the projector
to cool for 5 minutes before
disconnecting the power or
moving the projector.
Preserve the removed handles
together with the full set of screws to
ensure that they can be reattached if
needed.