INSIGHT 4K LASER User Manual
1. Projector Parts
1.1.
Features
•
Employs a long life laser light source
The projector employs a newly developed laser light source offering excellent reliability and redundancy. Since the laser light source has a long
life (approx. 20,000 hours), this delivers low cost operation by removing the need for maintenance such as replacing and adjusting the light
module over extended periods of time. Furthermore, it reduces the risk of the light source suddenly shutting off and leaving a black screen.
•
Delivers reduced installation space and increased freedom through a more compact and lightweight body
The use of a 1.38" DLP chip together with integration of the light module into the projector main unit both delivers a reduced installation area as
well as improving the degree of freedom of installation, such as removing the need to connect to external ventilation ducting and supporting both
pedestal-mounted and ceiling-suspended installation. A wide variety of optional lenses (sold separately) are also available for the projector in
order to support a wide variety of installation methods (a lens is not mounted when the projector is shipped from the factory).
•
Equipped with easy to use functions
Degradation of brightness and variations in color that occur as the light source is used for longer periods of time are kept to a minimum (the
period over which variations in brightness can be limited varies depending on the brightness setting).
•
Frequently used titles can be registered in preset buttons
The projector has been equipped with 8 preset buttons that make it easy to select registered title (input signal). To this projector, 100 titles at
most can be registered (input signal registration). Among the registered titles, any 16 titles can be assigned to the preset buttons.
You can operate and configure the projector via a network from a PC
You can operate and configure the projector via a network from a PC by using the separately supplied software Digital Cinema Communicator
(DCC) for S2.
•
Advanced Dust Protection
A dust control shield is arranged between each DMD chip of R, G and B, and the spectroscopic/condenser prism. It prevents dust and dirt in the
air, and oily particles in smoke associated with event halls from coming into contact with the face of the DMD and causing operating problems.
Page
14
of
65
