Digital Projection HIGHLite1400HD, Руководство пользователя

Страница: 56 / 96

E-56
4. Press the ENTER button.
5. Use the SELECT
GHFE
button to move the projected image frame as
shown on the example.
6. Press the ENTER button.
6. Using On-Screen Menu
• The indicated adjustment ranges are following;
Horizontal direction ....
±
30 degrees (maximum)
Vertical direction ........
±
40 degrees (maximum)
• When horizontal and vertical adjustment is occured at a time, the adjustment
range will be narrower.
• Curved Line Warp Correction
Only linear screen warp is adjusted by Cornerstone Correction. Curved screen
adjustment to correct for lenses or screens (cylindical or spherical) can be ad-
justed by an application software, Geometric Correction Tool.
The Geometric Correction Tool is available from Digital Projection please contact
your dealer. Geometric Correction Tool version 3.0 or higher is recommended.
Screen
Screen Type
Select the correct aspect ratio for the screen to be used.
See also "Aspect Ratio" on page E-53.
NOTE:
• When "Resolution" is set to "Native", this selection is inactive.
Position
This feature adjusts the vertical position of the image when view-
ing video with an aspect ratio selected.
When some aspect ratios are selected in Image Options, the
image is displayed with black borders on the top and bottom.
You can adjust the vertical position between top and bottom.
NOTE: This option is available only when "1.78:1 (16:9)", "1.85:1" and "2.35:1 " are
selected in Screen Type and Aspect Ratio.
Ref. Lens Memory
This function serves to store the adjusted value common to all
input sources when using the Shift, Focus, and Zoom buttons of
the main unit or the remote control.
Set Reference Point ............. Stores the current adjusted val-
ues in memory as a reference.
Use Reference Point ............ Applies the adjusted values
stored in Set Reference Point to
the current signal.
Return to Factory Default ..... Returns the adjusted values to
the factory default setting.
Use Point on Signal Change? .... For change to take effect at the
time of source selection, select
“Yes”.
Picture Mute during Lens Shift? ... To turn off the image and sound
during lens shift, select "Yes".
Screen
Screen
7. Use the SELECT
GHFE
button to select another icon which points in
the direction.
8. Repeat 4-7.
9. On the Cornerstone adjustment screen, select “Exit” and then press
the ENTER button.
The confirmation screen is displayed.
10 .Press the SELECT
F
or
E
button to highlight the [OK] and press the
ENTER button.
This completes the keystone correction.
Selecting “Cancel” will return to the adjustment screen without saving
changes (Step 3).
Selecting "Reset" will return to the factory default.
Selecting "Undo" will exit without saving changes.
NOTE:
• In the case “Resolution” is set as “Real”, “3D Reform” can’t be chosen.
• In the case keystone warp is adjusted by “3D Reform”, “Aspect” or “Screen Setup”
can’t be changed in some case. In such a situation, “3D Reform” adjusting value
must be reset first and each setup must be changed. After that keystone warp
should be changed again.
• In the case using MM-WARP (optional), some internal part of picture signal will
be 8 bit process.
• Ask the shop this equipment was purchased when MM-WARP (optional) imple-
mentation is necessary.
• In the case Keystone Correction’s vertical setup value is adjusted when MM-
WARP is not in use, the data will be reflected when MM-WARP is used, however,
adjustment content will be different. Re-adjust setup value as circumstance de-
mand.
• When 3D Reform is done, picture quality is degradated comparing to no
adjustment done.
Also, when screen is warped in a large scale, the noises occasionaly show up
on the screen.
NOTE:
• “3D Reform”’s adjustment value is saved even this equipment is OFF. To restore
the adjustment value to factory default setting, press “Keystone Button” on the
remote controller for more than 2 seconds.
• Press the remote controller’s “Keyston Button” while “3D Reform” screen is ac-
tivated. Each time the button is pressed, [Cornerstone] screen and [Keystone]
screen are shown one after another.