Digital Monitoring Products XTLplus Series, Инструкция по установке и программированию, Страница: 19 / 64

XTLplus Series Installation and Programming Guide | Digital Monitoring Products 12
FAST PROGRAMMING
Fast Program
The Fast Program section allows you to quickly configure the essential settings for
the XTLplus Series panel. When the panel programming defaults are acceptable
for installation and only basic programming options are needed, FAST PROGRAM
allows the installer to quickly enter information without navigating through all of the
programming menus.
Account Number
Enter the account number sent to the receiver. The range of account numbers are
1 to 65535. For account numbers of four digits or less, you do not have to enter
leading zeros. The panel automatically right-justifies the account number. See
"Communication" .
First IP Address
Enter the first (primary) IP address which is Central Station's IP Address and press
CMD
. The panel displays WPS? NO YES. Press the fourth Select Key or Area to
choose YES. Press the WPS button on the router. WIFI SETUP SEARCHING displays
until connected to the IP address. Advance to APP Key. See "Communication" .
App Key
Enter the 8-digit App Key obtained in your Dealer Settings tab in Dealer Admin
( dealer.securecomwireless.com ). See "Remote Options" .
System
This configures the panel as either a six-Area system, an All/Perimeter system
(Perimeter/Interior), or a Home/Away system (Perimeter, Interior, and Bedrooms). See
"System Options" .
Hours from GMT
Enter the number (0-23) that indicates the Greenwich Time zone (GMT) where the
panel is located. See "System Options" .
Weather Zip Code
Enter the zip code of where the panel is located. See "System Options" .
Enter Siren Serial Number
Enter the eight-digit serial number for the wireless siren. The siren is automatically set
to Output 61. See "Output Setup" .
Zone Number
Enter the zone number to program. See "Zone Information" .
Zone Name
Press any Select Key or Area to display the default zone name. To change the default
zone name, press any Select Key or Area to clear name. Enter up to 16 characters for
the new zone name.
Zone Type
To change the default zone type press any Select Key or Area. See "Zone Information" .
Area Assignment
To change the default area, press any Select Key or Area.
Serial Number Entry
Enter the 8-digit serial number, including leading zeros, found on the wireless device.
FAST PROGRAM
ACCOUNT NO:
FIRST IP ADDR
WPS? NO YES
FIRST IP ADDR
0.0.0.0
APP KEY
SYSTEM: ALL/PERIM
AREA A/P H/A
HRS FROM GMT: 6
ENTER WEATHER
ZIP CODE:
0
ENTER SIREN
SERIAL#:-
ZONE NO: -
* DEFAULT NAME *
ZONE TYPE: -
AREA: -
SERIAL #: -