DIGITAL-LOGIC MPC25/L, Техническое руководство пользователя

Страница: 44 / 53

DIGITAL-LOGIC AG
MPC25/26 Manual V1.1
44
The configuration setup menu shows a list of configuration settings on the left and their corresponding values
on the right. Key descriptions near the bottom of the menu indicate how to change values for the
configuration settings. For each selected setting, a brief "mini-Help" description of its function appears just
above the key descriptions.
1. Highlight the setting you need to change by using the
arrow
keys.
2. Once you have accessed the setting you want to change, press the spacebar until the desired value
appears.
3. Once you have completed your changes, press F4 to update the adapter with the new values. Any
changed configuration values are applied as the boot process resumes.
The table below provides a list of configuration settings, their possible values, and their detailed descriptions:
Boot Agent Configuration Settings
Configuration
Setting
Possible Values Description
Network Boot
Protocol
PXE (Preboot
eXecution
Environment)
RPL (Remote
Program Load)
Controls whether the RPL or PXE boot protocol will be used.
Select PXE for use with WfM -compatible network management
programs, such as LANDesk* Management Suite, Windows* 2000
RIS, and Linux*.
Select RPL for legacy-style remote booting, as well as for Novell*
Netware* remote boot solutions.
NOTE…
Depending on the configuration of the Boot
Agent, this parameter may not be changeable.
Boot Order
Use BIOS Setup
Boot Order
Try network first,
then local drives
Try local drives first,
then network
Try network only
Try local drives only
Sets the boot order in which devices are selected during boot up if
the computer does not have its own control method.
If your client computer's BIOS supports the BIOS Boot
Specification (BBS), or allows PnP-compliant selection of the boot
order in the BIOS setup program, then this setting will always be
Use BIOS Setup Boot Order
and cannot be changed. In this case,
refer to the BIOS setup manual specific to your client computer to
set up boot options.
If your client computer does not have a BBS- or PnP-compliant
BIOS, you can select any one of the other possible values listed for
this setting
except
for Use BIOS Setup Boot Order .