Digital Loggers DIN Relay 4, Руководство пользователя

Страница: 5 / 15

DIN RELAY 4
5
Windows 7 :
Use the default Category View . Open
the
Start orb
, click on
Control Panel
. Click
View
Network Status and Tasks , then Change Adapter
Settings
. Proceed to step 2.
Windows 8/10:
Mouse or swipe to the bottom right
corner and select Settings . Select Control Panel .
Select
Network and Sharing Center
. Change
Adapter
Settings . Right click on your connected network and
select
Properties
. Proceed to step 2.
Windows Step 2
The second step is adding an IP such as 192.168.0.50.
If you are using DHCP, it’s easiest to temporarily
disable it while configuring the relay.
Select Internet Protocall TCP/IP V4 Properties and
click Properties . Enter a compatible static IP. Click
Apply and close windows. Ping the relay to confirm.
Point your browser to 192.168.0.100 Log in.
Max OS X IP Setup
Turn AirPort off temporarily. Click the Apple logo, then
System Preferences , then Network . Select Built-In
Ethernet and then Configure. Under the TCP/IP tab,
select Manually and enter an IP address such as
192.168.0.50