Item Description
Enable PTZ
Click the box to Enable/Disable PTZ function for each channel.
Protocol
Set up the protocol of PTZ cam. The supported protocol are
PELCO-P, PELCO-D, KND, LI-LIN, SAMSUNG, LG, AVTECH.
PTZ ID
Click or press
◀
▶
to
set up PTZ ID. The valid ID value is from 1
to 64.
Baud Rate
Select Baud Rate for PTZ from 2400, 4800, 9600,19200
RS-485 ID
Select RS-485 ID from 1 to 64
RS-485 Baud Rate
Select RS-485 Baud Rate from 2400. 4800, 9600,19200
Keyboard
Select Keyboard. (Li-Lin)
Note
：
4CH DVR will display 4 channels and 8CH DVR will display 8 channels.
4-8 SYSTEM SETUP
Item Description
DVR Name
The name of DVR will be shown when users login from remote access.
DVR Location
The location of DVR will be shown when users login from remote access
Language
Click or press
▼
to select OSD language from English, Traditional
Chinese, Simplified Chinese, Japanese, Greek, Portuguese
Remote ID
Default ID is 1. When DVR is controlled by standard remote control,
please press “DVR1
＊
” before using it. When more than one DVRs
are purchased, the DVRs can be numbered from 1 to 4. For
instance, standard remote control can’t operate DVR numbered 3. It
only responds when “DVR3” button has been pressed beforehand.
Display Setup
Enter to set up Display
Date/Time Setup
Enter to set up Date/Time
Device Setup
Enter to set up Buzzer & Relay
Spot Setup
Enter to set up Spot
＊
Default ID is ID1. If remote control malfunctions, please press, “DVR1” button to
renew corresponding DVR ID.
2009.12.14 IV-411ECO/IV-811ECO/IV-1611ECO User Manual V0.4(N02)
33
