![background image](http://html.mh-extra.com/html/digital-equipment/swxor-series/swxor-series_user-manual_2498501024.webp)
Chapter 2 Installation
Order Number: EK–SM1RC–UG. B01
2–13
4. Remove the top cover as follows:
CAUTION
To prevent damage to the SBB or the device, use a
screwdriver and
minimal pressure to release each mounting
tab.
a.
On the left side, push in each of the four top cover side mounting tabs until they
are released from the bottom cover (Figure 2–14).
b. On the right side, push in each of the four top cover side mounting tabs until this
side is released, then remove the top cover.
5. Attach the top cover to the mounting bracket as follows:
a.
Position the top cover over the mounting bracket and align the mounting holes
with the screw holes in the top of the mounting bracket (Figure 2–15).
b. Insert and tighten the four 4-40 pan machine screws (recommended torque is
seven inch-pounds).
Figure 2–15. Top Cover to the Mounting Bracket
Содержание SWXOR Series
Страница 1: ...SWXOR Series 600 MB 5 25 Inch Dual Speed CD ROM Disk Drive User s Guide Order Number EK SM1RC UG B01 ...
Страница 15: ...Chapter 2 Installation Order Number EK SM1RC UG B01 2 5 Figure 2 4 Loading a Disk into the Drive ...
Страница 16: ...Chapter 2 Installation Order Number EK SM1RC UG B01 2 5 ...
Страница 31: ...StorageWorks Dual Speed CD ROM Drive 2 20 Order Number EK SM1RC UG B01 Figure 2 22 Bezel Attachment ...