Digital Equipment STARION 20 Series, Руководство по техническому обслуживанию

Страница: 16 / 92

Utilities & Configuration Digital STARION 9xx & 20xx PC
16 MCS Logistics Engineering - Nijmegen
Restoring Factory-Installed Software
In the event of a hard disk failure or the software becomes corrupted, restoring all or some of the factory
installed software might be necessary. To re-load all factory installed software will be needed to use the
System Software Restore CD and the System Software Restore/Boot diskette supplied with the computer.
Individual program applications can be re-installed using the Restore Factory Programs selection included
in the “Getting Started” Service selection.
A Windows 95 Backup CD is also included should you choose to install the Windows 95 operating system
only. However, when using only this restore method the computer will not be optimized with the various
utilities and system application software integrated and fully supported by Digital.
Restore All Factory-Installed Software
To restore all factory software proceed as follows:
1) Close and save any open files, close all applicationsand shut down Windows 95.
2) Insert the System Software Restore/Boot diskette into the diskette drive.
3) Insert the System Software Restore CD into the CD-ROM drive.
4) Reboot the computer.
The computer will then prompt for confirmation that you want to perform the software restore
procedure and format the hard disk drive.
5) Enter [Y] to proceed.
The system software isl then copied to the hard disk drive. This process will take about 15 minutes.
6) When the files have been successfully copied, remove the System Software Restore/Boot diskette and
the System Software Restore CD.
7) Reboot the computer.
All system software is now loaded to the out-of-box factory condition.
8) The computer will now display several Windows 95 welcome and user registration screens. Select
“Gathering Information”, then enter any requested user registration and COA license information
requested.
NOTE If the computer can still perform basic functions, Digital recommends to first make
backup diskettes of all important personal files that are created since purchasing the
computer. Restoring the factory software will re-format the hard disk and erase all
personal data.