manualshive.com logo in svg

Digital Equipment SmartSwitch SmartMIM-216, Руководство пользователя

Поделиться
Скачать
Digital Equipment SmartSwitch SmartMIM-216 Скачать руководство пользователя страница 20

 

SmartTrunk Configuration

2-4

 

SmartTrunk State

 

 (Toggle)

 

Used to enable or disable SmartTrunking for all groups deÞned on the device.

¥

ENABLE - Select to change state to On

¥

ENABLED - Currently On

¥

DISABLE - Select to change state to Off

¥

DISABLED - Currently Off

 

Add/Remove Group

 

A user-deÞned 32-character string describing the group of SmartTrunk ports.

 

Group

 

Is either of the following:

¥

ADD - Create a SmartTrunk Group Name. The name Þeld will become empty, 
awaiting user input.

¥

DELETE - Remove the SmartTrunk Group Name. The name Þeld will 
automatically Þll with SmartTrunk names found on the device. Users may 
either type in the name to be deleted or use the SmartTrunk Group Þeld to 
toggle through the list of names found on the switch.

 

Display Group

 

A list of the SmartTrunk groups available on this device. Selecting a group 
updates the table in the center of the screen. The table displays the ports and 
current state of the members included in the group. If no groups have been 
created (Added), then this Þeld will remain blank and the table will display no 
data.

 

Port

 

When State is:

¥

ADD - Displays the ports available to add to the displayed group. Ports 
assigned to other trunk groups will not show up in this list because they are not 
available to add.

¥

REMOVE - Displays a list of ports currently assigned to the active SmartTrunk 
group. They are the only ports available for deletion.

 

UPDATE

 

 (Command)

 

Refreshes the table currently displayed.

A SmartTrunk port in a disabled state will not allow any trafÞc to ßow until the 
appropriate corresponding trunk group is connected. Inadvertently conÞguring a 
user-attached port to a member of a SmartTrunking group will result in the user 
losing network connectivity. 

NOTE

Содержание SmartSwitch SmartMIM-216



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды