manualshive.com logo in svg

Digital Equipment Pro-Face GLC2000 Series, Руководство пользователя, Страница: 90 / 165

Поделиться
Скачать
Digital Equipment Pro-Face GLC2000 Series Скачать руководство пользователя страница 90

Chapter 6 – Initializing the GLC

GLC2400/2500/2600 Series User Manual

6–3

6.3.1 SYSTEM SETUP

6.3

System Environment Setup

STAND-BY MODE TIME (0–255)

To protect the GLC unit’s display screen, a screen saver function automatically turns
the unit’s backlight(s) OFF when no operations have occurred within a specified
period of time.  No screen saver will be used when 

“0” 

is entered in this field.

When the 

SYSTEM DATA AREA

’s 

SCREEN DISPLAY OFF

*1

 data is set to 

0000h

,

the GLC unit’s current display data will clear if the following operations are not
performed within the user’s specified period of time:

• Change Screen

• Touch Screen

• Alarm Messages (scrolling display)

• Error Messages (Except for 2Way Error)

• Menu Bar (for forced reset) display

• Japanese (FEP) System window

START TIME (0–255)

Use this setting item to specify the GLC unit’s startup time — or to adjust the
powering-up sequence — so that the GLC starts up 

after 

the PLCs start.

TOUCH BUZZER SOUND

This setting item indicates, with a buzzing sound, that the GLC has been touched.

BUZZER TERMINAL OUTPUT

This feature  is not available in the GLC2000 Series, and therefore is disabled.

1.

When using the Direct Access format, the object address becomes LS0009.  When
using the Memory Link format, the object address b12. (Only when all items
are set within the System Data Area

.)

GP-PRO/PBIII for Windows  Device/PLC Connection Manual

(included with the screen creation software)

Adjustments to the GLC operation environment are made within the setup screens
contained in the 

SYSTEM ENVIRONMENT SETUP

 menu. Screens include the

SYSTEM SETUP, SYSTEM DATA AREA, GLOBAL WINDOW SETUP, 

and 

CHAR-

ACTER STRING DATA SETUP

 screens.

Содержание Pro-Face GLC2000 Series






































































































































































Отзывы:

Нет отзывов