background image

v

PowerGrade Option Warranty

This document is a supplement to the warranty information and terms
provided with your Prioris Server.

PowerGrade Options Limited Warranty

PowerGrade option kits are qualified Digital Personal Computer Hardware Options that
are warranted to be free from defects in material and workmanship under normal use.
This Limited Warranty does not extend to any Product not purchased from Digital or
from an Authorized Digital Reseller.  This Limited Warranty also does not extend to
any Product that has been damaged or rendered defective (a) by operation outside the
usage parameters stated in section four entitled 

Warranty Exclusions and Limitations of

Liability 

of the

 Digital Personal Computers Warranty and Service Information

document; (b) as a result of accident, misuse or abuse; (c) as a result of service or
installation by anyone other than Digital, an Authorized Digital Reseller, or an
Authorized Digital Service Provider, or (d) by the use of parts not manufactured or sold
by Digital.

Upon installation in the appropriate Prioris Server, the PowerGrade option will carry
the longer of either a one year Return-to-Digital warranty or the remainder of the
warranty period for the Digital Prioris Server.

Digital warrants that the PowerGrade option you have purchased from Digital, or from
an Authorized Digital Reseller, will function correctly when properly installed in the
appropriate Prioris server if the CPU contained within this kit is within one stepping
(version) of the CPU(s) that originally came with your Prioris Server.

Warranty Exclusions and Limitations of Liability

Installation of a PowerGrade option requires handling and installing a CPU chip, which
must be performed with extreme care to avoid product damage.  Therefore, Digital
recommends that the installation of this option be performed by an Authorized Digital
Service Provider.

Please refer to the “Digital Personal Computers Warranty and Service
Information” document provided with your Digital Prioris Server for further
information.

Содержание Prioris MX 6200























Отзывы: