Digital Equipment PCI32-VME64, Руководство пользователя

Страница: 18 / 18

Installing the PCI32-VME64 Adapter
2–4 DIGITAL PCI32-VME64 Adapter Hardware Owner's Guide
4. Install the PCI adapter module as follows:
a. Remove slot covers from PCI slots.
b. Align the PCI bus bridge adapter module with the slot and push down to make a firm
connection, then fasten the screw.
c. Reinstall the slot covers for the PCI slots and fasten the screws.
d. Attach the interconnect cable to the PCI bus bridge module, making sure the
connection is firm, and tighten the thumbscrews on the connector.
e. Close the system unit and reconnect the power cord.
5. Install the VMEbus bridge module (see Figure 2-2), following these steps:
a. Remove the cover plate from the VME chassis by removing the screws.
b. Align the VMEbus bridge adapter module with the slot
› and push down to make a
firm connection with the slot connectors
™. Tighten the two screws š to fasten the
module to the backplane.
c. Attach the interconnect cable to the VMEbus bridge module, making sure the
connection is firm, and tighten the thumbscrews on the connector.
6. Power on the VME chassis and the host system.
Figure 2-2 VMEbus Bridge Module Installation
1
2
3
ML013589
2.4 Testing the Installation
After applying power to the adapter verify that the LED on the front panel of the VME
module is on. This verifies that the proper voltages are applied to the module and that the
clock circuitry is functioning properly
The PCI module and cable connections are verified by the adapter software at system boot
time.