8
4. Upon rebooting Windows NT, the new display characteristics will be loaded and the
mach64 comes up in the selected display mode.
Note: When updating from an older to newer version of the mach64 driver, it may be
necessary to perform a cold reboot process in order to load the new ATI.DLL file.
5.3
OpenVMS Installation Procedure
Below are the characteristics of the PB2GA-FV option for OpenVMS systems.
Firmware requirements: SRM x3.9-1387 or higher
Operating system requirements : OpenVMS V6.1-1-H2 or higher (mach64 kit required)
Resolutions supported:
Display
Vert. Freq. Pixel Freq.
640x480
72 Hz 31.5 MHz
800x600
72 Hz 50 MHz
1024x768
70 Hz 75 MHz
1280x1024
66 Hz 119 MHz
__________________________Note______________________________
When the OpenVMS system is powered on, the mach64 runs in VGA text mode
as a terminal device. Be advised that Motif cannot be started until the following
procedure has been completed.
____________________________________________________________
1. Log into the system account from the graphics head or serial terminal.
2. Mount the OpenVMS support diskette that accompanies the mach64 option.
mount dva0: /over=id
3. Invoke the VMSINSTAL procedure.
@sys$update:vmsinstal axpgup01_061 dva0:
4. Proceed by following the simple on-screen instructions. When done, this procedure
forces a shutdown and reboot.
5. When rebooting, the operating system automatically detects the presence of the
mach64 and defaults to the 1024 x 768 display resolution mode. (Note: During reboot
the system display may momentarily appear somewhat distorted. This condition will
correct itself once the DECwindows server comes up.)
