Digital Equipment EF5 Series, Руководство пользователя, Страница: 32 / 108

Installing into the SF7X Enclosure
Preparing
for the
Installation Prepare for the installation into an SF7X enclosure as detailed
in the DECarray Installation Guide, (EK–SF2XX–IG).
CAUTION
Static electricity can damage integrated circuits.
Use the antistatic wrist strap and antistatic pad
found in the static-protective field service kit
(29-26246-00) when you work with the internal
parts of a computer system.
Handle the ISE with care. Dropping or bumping the
ISE can damage the disk surface.
Before installing into the SF7X enclosure, you must first:
Remove the ISE’s top and bottom brackets
Insert wedges on the ISE
Removing the brackets and inserting the wedges are explained
in the next sections.
Removing the
Brackets To remove the ISE’s top and bottom brackets:
1.
Place the ISE on an antistatic mat.
2.
Remove the two Phillips screws at the rubber shock
bushings that secure the top bracket to the side of the
chassis (Figure 2–3). Put the screws aside.
3. Slide the interface card assembly up and lift off the top
bracket (Figure 2–3). Place the bracket aside.
4. Unplug the interface card assembly power cable (5 pin
cable) from the drive.
5. Unplug the interface card assembly 50 pin data cable from
the drive.
6. Unplug the remote front panel cable from the drive.
Continued on next page
2–8