8
2.
Installation of The Device
Integrating this device with your existing car stereo system is simple and easy. Simply
connect both the existing FM antenna and DAB antenna to the device inputs, then the
FM-modulated DAB radio is readily available via its FM output (F female connector on the
other end of device). This paragraph is intended to guide you step by step how to
correctly configure this device with existing FM antenna, power source, and audio
output delivery to the car stereo.
2.1 Connecting to the inputs
•
Connect the existing FM/AM antenna (available from the car) to the port (a) of the
unit.
•
Connect DAB antenna into the DAB antenna port (b) of the unit.
•
Connect IR receiver to the IR port (c). The IR receiver “window” should be located at
positions that can maintain a line-of-the-sight for better command reception.
•
Connect the wiring harness correctly to port (d) on the unit. This harness include
+12V car battery supply, ignition wire (ACC), and ground wire. Note that a separate
ISO connection cable may be provided to ease the connection.
2.2 Connecting to the output
In general cases, connect the device’s FM antenna output port (g) to the car stereo’s FM
input as depicted below. No extra wiring is needed. The received DAB radio contents is
already converted into FM signal and fed into the car stereo as a commonplace FM
station.
FM/AM antenna from car
DAB antenna
In.
IR receiver
In.
B12V wire (yellow)
Ignition ACC wire (red)
Ground wire (black)
Wiring harness
(a)
(b)
(c)
(d)
