Verify power.
Installing the Module in a DEChub 900 MultiSwitch (continued)
DECserver 900TM 5
a. With power on in the DEChub, verify
that the Power LED is on.
b. Verify that the Module OK LED
remains on after the module
completes self-test.
Connect the port cables to any
available port connector on the module.
Connect the port cables.
LKG–8091-93I
LKG–8090-93I
Module installation is complete.
Notes:
Port 1 by default may be used as a
console port.
The DECserver 900TM does not sup-
port the out-of-band management
(OBM) port or the setup port on the
DEChub ONE. No devices should be
connected to these ports.
