EISA Configuration Utility (ECU)
EISA Configuration Utility (ECU)
Running the
ECU
To configure the QVision controller within the system or to
change the configuration settings, you must run the ECU. See
the DECpc AXP 150 and DEC 2000 Model 300 AXP Customer
Technical Information manual for information on running the
ECU.
Changing the
Configuration
You can use the ECU to change the configuration of the QVision
controller. Table 2–1 shows the functions and the corresponding
choice of settings for the QVision 1024/E controller.
Table 2–1 Configuration Settings
Function
Choice of Settings
Video Modes Status:
Color Text Modes
Supported
Secondary
Monochrome Text Modes
Supported
Secondary
Graphics Modes
Supported
Secondary
(continued on next page)
2–2 Configuring the QVision Controller
