Upgrade Procedure
2.
Enter
cnfg 3
at the console prompt (>>>). A screen similar
to the following appears:
>>> cnfg 3
3:
KNO2
DEC
Vn.n
TCF0
(12 MB)
(enet:
08-00-2b-30-14-df)
(SCSI = 7)
-----------------------------------------------------
DEV
PID
VID
REV
SCSI ID
-----------------------------------------------------
rz2
RZ24
(C) DEC
0700
DIR
rz5
RX26
(C) DEC
0700
SEQ
This sample display shows an RZ24 drive set to SCSI ID 2 and
an RX26 drive set to SCSI ID 5.
Write down the names of your system drives and SCSI ID
settings here. You will need them for future use.
Step 2: Shut
Down System
Turn off the system unit by pressing 0 on the On/Off switch on
the back of the system unit.
Caution: After you turn off the system, wait 15 seconds before
unplugging the power cord.
Step 3:
Disconnect
Cables
Disconnect all the cables from the back of the system unit.
Disconnect the power cord from the wall outlet and then from
the system unit.
3–2 Upgrading a DECstation 5000 Model 240/260
