Digital Devices Max S8, Руководство пользователя

Страница: 7 / 14

7 User manual
– Digital Devices Max S8
Stand: 18. Mai 2015
9 Wiring diagram
Your Digital Devices Max S8 can be connected to your satellite reception system according to the
following scheme. Depending on the variant you use, you must set the settings in the driver under
Linux or via the DD Control Center under Microsoft® operating systems.
9.1 Settings in Linux Driver
Set following ddbridge parameter for fmode:

fmode = 0 Demod 0 & 4 at Input 1
Demod 1 & 5 at Input 2, etc.
The input for each front end can be changed using: ioct DTV_INPUT

fmode = 1 All the cables are connected via a quad LNB

fmode = 2 All cables are connected via a Quattro LNB or Multiswitch cascade
output: Input 1=VL, 2=VH, 3=HL, 4=HH

fmode = 3 All Demods are connected to Input 1 and send JESS or SCR (Single Cable
Routing - one cable solution) commands from the application