Elite RPM Switch
Instructions
Congratulations on purchasing the latest shift controller from Digital Delay.
The Elite RPM Switch has some
new features so please read the instructions before using.
Contents:
Warranty and Disclaimer............................….............................................…………….….Page 1
The Terminal Strip...............................................................………….....................……… Page 3
Initial Setup
Shift On Pulse Time…..…………………………………..........................………. Page 3
Shift Mode……………….………………………………..........................………. Page 3
Number of Cylinders…….………………………………..........................………. Page 3
Shift Points
1
st
Shift Point………………………...............……............………................……. Page 4
2
nd
Shift Point……………………………………………..........................………. Page 4
3
rd
Shift Point...………….………………………………..........................………. Page 4
4
th
Shift Point…………….………………………………..........................………. Page 4
Operation…………….................................................................………….....................…. Page 4
Shift Output Test…….................................................................………….....................…. Page 5
Wiring……………………………………………………………………………………… Page 5
Features and Specifications
Features:
• Microprocessor controlled timing
• Programmable on pulse lengths for shifts (.20 - .99)
• Ignition Switch input to disable the Shift Output when the engine is off
• Retains all numbers even with power disconnected from unit
• Large LCD (liquid crystal display)
• Works on 4, 6, and 8 cylinder engines
• 4 programmable shift points
• High current output, no external relay needed in most cases
Specifications
:
•
Input Voltage Range: 10 to 18 Volts DC ( 16 Volt compatible )
•
Operating Temperature Range: 0 to 150 degrees F.
•
RPM Switch Range: 3000 to 9900
• Shift Output (40Amp Capacity)
2036 Fillmore Street, Davenport, Ia. 52804
563-324-1046
2