Digital Check SmartSource Elite Series, Инструкция по установке и эксплуатации, Страница: 7 / 32

SmartSource Elite Series - Installation & Operations Guide
January 2017 8227 4907-003
Page 7 of 32
Section 1
Setting up the Unit
Choose a Location

The unit is for indoor use only.

The location should be clean, dry, well-ventilated, and out of direct sunlight.

Select a flat, stable location.

A suitable USB port on the host PC must be within 6 feet (2 meters) of the rear of the unit.

A suitable AC outlet (100-240 VAC, 50/60 Hz) must be with 9 feet (3 meters) of the rear of the unit

Provide adequate clearance on all four sides of the unit to load and unload documents, insert rigid
cards, open covers for cleaning, and make power and USB connections
Power Supply
Your SmartSource Elite unit may be affected by surges or dips in the electrical power supply. These may
cause the unit to pause, or stop working, or require the user to restart the unit. Such surges and dips will
generally not harm the unit.
Surge and dips are usually the result of other large electrical loads on the same branch circuit, such as
air-conditioners or heaters.
If such problems occur, try connecting the unit to a different branch circuit outlet that does not supply
other large electrical loads. If problems persist, it may be necessary to isolate the unit from the power
supply outlet using a line conditioning device or an Uninterruptible Power Supply (UPS), both of which are
available from
Digital Check
.
Need Help?

In the USA, you can call the
Digital Check
Help Desk at 1-8
47
-
446
-
2285
for live customer
support,
8:30 a.m. to 5 p.m
.
Monday through Friday.

Online, go to www.
digitalcheck
.com for general product information, manuals, drivers and
downloads and training/support videos.

For replacement parts and consumables, service and support parts, visit
www.
store.digitalcheck
.com .